These are some parts that I've made over the years that others have expressed interest in. If there's something along these lines that I don't have listed but seems up my alley, just email me gearheaddezign@gmail.com
Z BUMPER TAG
This 3-color decal replaces the discontinued emblem for the GTZ/Z26 bumper. You can order a custom color combo if you want, but the classic Chevy black/silver/red looks really good.
$25 . Beretta bumper "Chevrolet"
FILLER PANEL LETTERING
These BERETTA letters go on your filler panel, for perfectly clean lines. I've used paint before, but the edges always look a little ragged, no matter how careful you are. So I took my dial calipers and made these vinyl letters fit perfectly. (Took a half dozen tries). Comes with tighter spacing you can use as a regular sticker anywhere. To apply to filler panel, cut each letter from the backer individually. Please specify color.
$25 . Beretta filler letters
98+ CLUTCH PEDAL PIVOTS
These pins replace the hollow plastic junk that Chevy used. Completely replace that 20+ year old brittle plastic with solid steel hardware. Includes pins, bushings and spring. Also allows you to install or remove clutch pedal from a donor or swap vehicle without pulling the entire dash out. I have a full video here that shows the process: Youtube
$69 . S10/Blazer clutch pedal pivot pins (98+ only)
BOWTIE INLAY
This is a custom cut piece of vinyl to make your own "sport" or custom bowtie. Remove your original emblem and clean it up, sand and paint to the outside color you want. Then stick this vinyl to the center for a finished look. Specify color or default to black.
$20 - S10/Blazer front bowite $30 - kit with front, sides & rear
CUSTOM EMBLEM
This is a custom plastic emblem that matches the style of the stock ones. Let me know what text you want: HOSS, BARB, HOE, BBC, NV4500, CLIBBINS, etc etc.
$69 - GMT800 custom emblem $121 - kit with 2 sides & rear
BOWTIE INLAY
This is a custom cut piece of vinyl to make your own "sport" or custom bowtie. Remove your original emblem and clean it up, sand and paint to the outside color you want. Then stick this vinyl to the center for a finished look. Specify color or default to black.
$20 - 99-02 Silverado/00-06 Tahoe Burb front bowite $30 - kit with front, sides & rear
HD BOWTIE INLAY
This is a custom cut piece of vinyl to make your own "sport" or custom bowtie. Remove your original emblem and clean it up, sand and paint to the outside color you want. Then stick this vinyl to the center for a finished look. Specify color or default to black.
$20 - 01-02 Silverado HD front bowite $30 - kit with front, sides & rear
